<b>Mechanical properties of the rachis from macaw palm bunche
Resumo
Numerical implementation methods such as the finite element method can be used in machine design to study the dynamic behavior of the plant. Input parameters for using the finite element method should be set based on the geometrical, physical and mechanical system under study. Thus, the aim of this study was to determine the mechanical properties of the rachis of macaw palm in the green maturation stage at an age of 180 days and at fruit maturation. The water content was calculated using the oven method of 105 ± 3°C for 24 hours. The modulus of elasticity for the rachis was determined by means of mechanical compression testing. The Poisson's ratios were determined from the results of the longitudinal and transverse deformation of rachis test bodies. The shear tests were performed in two scenarios. In the first one, a blade was used without a tensioner, and in the second scenario, a blade was fixed with a tensioner, characterized by a chamfer at 45°. It was concluded that the modulus of elasticity of macaw palm rachis in the green maturity stage was higher than the values for the mature stage of ripeness.
Downloads
DECLARAÇÃO DE ORIGINALIDADE E DIREITOS AUTORAIS
Declaro que o presente artigo é original, não tendo sido submetido à publicação em qualquer outro periódico nacional ou internacional, quer seja em parte ou em sua totalidade.
Os direitos autorais pertencem exclusivamente aos autores. Os direitos de licenciamento utilizados pelo periódico é a licença Creative Commons Attribution 4.0 (CC BY 4.0): são permitidos o compartilhamento (cópia e distribuição do material em qualqer meio ou formato) e adaptação (remix, transformação e criação de material a partir do conteúdo assim licenciado para quaisquer fins, inclusive comerciais.
Recomenda-se a leitura desse link para maiores informações sobre o tema: fornecimento de créditos e referências de forma correta, entre outros detalhes cruciais para uso adequado do material licenciado.