Influence of the food matrix on dual-species biofilm of Listeria monocytogenes and Pseudomonas fluorescens

. In the food industry, the formation of biofilms results in serious microbial recontamination problem. This work aimed to study Listeria sp. obtained from sliced products and food handling surfaces, for the preparation of food of animal origin to be consumed cold. Listeria monocytogenes , Listeria innocua and Listeria seeligeri were detected. In the evaluation of antibiotic susceptibility, the isolates were sensitive to ampicillin and penicillin, which were the main antibiotics used in treatment. The isolates showed the ability to form biofilm in microplate, in stainless steel and polypropylene surfaces, with a variation of sessile cells between 4.29±0.23 and 7.03±0.01 log 10 CFU cm -2 in TSBYE. This ability was also observed in food matrix composed of UHT whole milk in mono-species cultivation and in associated cultivation of L. monocytogenes with Pseudomonas fluorescens . The application of sanitizers peracetic acid and sodium hypochlorite revealed efficiency in the eradication of adhered cells and biofilms formed in stainless steel surfaces. Therefore, Listeria sp. showed to be persistent and able to form biofilm in mono-species cultivation or associated with P. fluorescens , under different conditions. Taking these aspects into account, the need for proper hygiene in the food production process is highlighted in order to avoid risks to the consumers health.


Introduction
The growth in the frequency of foodborne diseases has been reported in recent years, with Listeria sp. one of the microorganisms implicated in outbreaks. This bacterium is found in different environments such as the Laboratories for the preparation of food of animal origin. These settings handle animal products ready for consumption and are important environments to be studied considering the risk of bacteria permanence on processing surfaces (Skowron et al., 2019).
The persistence capacity of this microorganism is due to its ability to adhere to surfaces and form biofilm (Ramires et al., 2021). The term biofilm is defined as a structured community of bacterial cells, within a microbial polymeric matrix, associated with a surface, providing protection to the bacteria. Listeria has been described as biofilm forming bacteria in different environments, and they can survive the sanitization processes, negatively impacting food safety (Skowron et al., 2019;Alonso, Harada & Kabuki, 2020). In view of this, the present work aimed to identify species of Listeria isolated from in Laboratories preparation of food of animal origin and evaluate the potential of biofilm formation under different conditions.

Biofilm formation of Listeria on microtiter plate assay
The ability of biofilm formation in vitro was determined as described by (Stepanovic, Cirkovic, Ranin, & Svabic-Vlahovic, 2004). The polystyrene microplate assay is an indirect measurement of the total biomass of cell adhesion or biofilms formed, and consequently, a measurement of biofilm in vitro. The sterile polystyrene microtiter plates (96 wells) were filled with 180 µL of TSBYE broth. The species of Listeria sp. were resuspended in 0.85% saline solution and adjusted to 0.5 McFarland scale and 20 µL of this solution was inoculated per well, in octoplicate. For the negative control, only TSBYE broth was used, followed by the positive control Staphylococcus epidermidis ATCC 35984 (Schmidt, Estes, McLaren, & Spangehl, 2018). The microtiter plates were incubated at 37ºC for 48 hours. Subsequently, they were washed with 200 µL of 0.85% saline solution and fixation of the bacteria was performed with 200 µL of methanol for 20 minutes. Afterwards, the microplate was stained with 200 µl of crystal violet (0.1%) for 15 minutes, followed by washing with sterile distilled water. After drying the microplates, the colored button fixed to the bottom of the wells was resuspended in 200 µL of 95% ethanol and kept at rest for 30 minutes. The optical density (OD) of the suspension was quantified with the aid of a microplate spectrophotometer reader at a wavelength of 595 nm (Model: Anthos 2010 Type 17 550 S. Nº 17 550 4894). The classification for biofilm formation followed the criteria described by Chusri, Phatthalung and Voravuthikunchai (2012). The mean OD of the negative control represented by 0.131 ± 0.004 was the cutoff point. The isolates were classified as follows: non-biofilm formers (NF): samples whose OD was less than the cutoff point. Weak biofilm formers (WF): samples with average OD above the cutoff, but less than or equal to twice the cutoff. Moderate biofilm formers (MF): samples with mean OD above twice the cutoff point, but less than or equal to 4 x the cutoff point. Strong biofilm formers (SF): samples with a mean OD greater than 4 x the cutoff point value represented by 0.524 ± 0.016.

Biofilm formation of Listeria on SS and PP in TSBYE culture medium
The study used AISI 304 stainless steel (SS) surfaces and polypropylene (PP) surfaces, both containing 1 cm 2 . Surfaces were sanitized as described by Alonso et al. (2020) and Bogo, Costa, Frazzon and Motta (2020) with modifications. For the experiment, selected bacterial colonies were transferred to TSBYE culture medium and incubated at 37ºC for 24 hours. Subsequently, an aliquot of 25 µL was transferred to 100 mL of TSBYE, obtaining ≅3 log 10 CFU mL -1 (T0). Three surfaces of each material were immersed in separate tubes containing 10 mL with inoculum in TSBYE and incubated in an oven, without shaking, at 37ºC for up to 72 hours. Every 24 hours, one surfac.e from each tube was aseptically removed, washed in sterile dH 2 O to remove planktonic cells and then immersed in 10 mL of 0.85% saline solution and vortexed for 3 min. to remove the sessile cells (Alonso & Kabuki, 2019). The evaluation of sessile cells (log 10 CFU cm -2 ) and planktonic cells (log 10 CFU mL -1 ) were performed at T0, 24, 48, and 72 hours. The Petri dishes containing TSAYE were incubated at 37ºC for 24 hours (Miles, Misra, & Irwin,1938).

Evaluation of biofilm formation capacity on SS and PP in UHT whole milk substrate
The surfaces were prepared according to the previous experiment, using the substrate UHT whole milk (commercial) at different temperatures. In incubations at 37ºC and room temperature (RT), with an average of 28.6ºC, sessile and planktonic cells were evaluated at times: T0, 24, 48 and 72 hours. As for the inoculum kept at refrigeration temperature, with an average of 7.9ºC, the evaluations were at: T0, 72, 120 and 168 hours.

L. monocytogenes with P. fluorescens in dual-species biofilm formation on SS and PP surfaces in UHT milk
The bacterial species used were L. monocytogenes QF Oxford and P. fluorescens PL7.1 (Bogo et al., 2020). These microorganisms were cultivated at optimal growth temperatures for 24 hours, standardizing the initial inoculum in ≅3 log 10 CFU mL -1 for both species (T0) and associated (1:1). The surfaces were incubated at RT (27.4°C) with evaluations at the T0, 24, 48 and 72 hours and in refrigeration (8.2°C) with evaluations at: T0, 72, 120 and 168 hours. Counts were performed in selective culture media: Agar Listeria Oxford and Agar Cetrimide. Plates were incubated at RT for 24 hours and cell numbers expressed as described above.

Evaluation of sanitizers for removal of the dual-species biofilm on SS"
The evaluation of sanitizers on the dual-species biofilm (L. monocytogenes and P. fluorescens) on SS surface in UHT milk after 72 hours was according to the methodology described by Young-Min, Seung-Youb and Sun-Young (2012) and Ga-Hee and Dong-Hyun (2016). The sanitizers used were: peracetic acid at a concentration of 0.2% (Peroxoni Top -Launer Chemical Industry and Commerce LLC-Brazil -Active content % Peracetic Acid ≥ 15.00) and Sodium Hypochlorite (Water Ypê Chlorine Active -Amparo LLC-Brazil -chlorine content % 2.0 -2.5 p/p) applied as indicated by the manufacturers. For that, the surfaces were washed three times in dH 2 O sterile to remove planktonic cells. The SS surfaces containing sessile cells were immersed in tubes with 10 mL of the sanitizing product for 10 minutes at RT, followed by the same procedure in dH 2 O sterile in negative control condition. After this time, the surfaces were washed three times in sterile dH 2 O to remove the sanitizers and were immersed in 10 mL of saline solution 0.85% NaCl. Following, they were vortexed for 3 minutes to remove the sessile cells after the action of the sanitizing agent. At this stage, the sessile cell count was performed using the method described by Miles et al. (1938). The counts were carried out onto medium Plate Count Agar (PCA), Agar Listeria Oxford and Agar Cetrimide, after incubated at RT for 24 hours.

Statistical analysis
Data were analysis using SPSS, version 18.0. Comparisons of qualitative data were performed using the chi-square test with adjusted residual analysis. For descriptive analysis, quantitative data with symmetrical distribution were expressed as means and standard deviations of means (± SD). All data showed a symmetrical distribution by the ShapiroWilk test. Categorical variables were described as absolute (n) and relative (n %) frequencies. Bivariate analyzes for comparisons of quantitative variables between the different treatments were conducted using Student's t tests for independent samples, one-way or two-way analysis of variance (ANOVA) with post hoc Bonferroni, when applicable. Bivariate analysis for comparisons of quantitative variables between different analysis times were conducted using Student's t tests for paired samples. The significance level was set at 5% for all analysis.

Evaluation of the biofilm-forming ability of Listeria by microplate method
In the evaluation of biofilm formation by the microplate method, three L. monocytogenes isolates presented a strong biofilm former profile. (SF): L. monocytogenes 4B (chicken carcass), L. monocytogenes ATCC 35152, L.
monocytogenes QF Oxford (sliced cheese). The L. seeligerii MP Oxford, isolated from food handler hands, presented a weak biofilm former (WF). The other bacteria showed results as moderate biofilm former (MF). Data is described in Table 1.

Evaluation of the ability to form biofilms on SS and PP in TSBYE culture medium
Biofilm formation of L. monocytogenes ATCC 35152, L. monocytogenes 4B and L. monocytogenes QF Oxford on SS and PP surfaces occurred in all times observed. The mean of planktonic cell values for the two surfaces observed during the study time of up to 72 hours was 8.76±0.40 log 10 CFU mL -1 . The sessile cell count on SS surface was between 5.20±0.31 and 5.52±0.08 log 10 CFU cm -2 for L. monocytogenes 4B, between 5.41±0.44 and 4.29±0.23 log 10 CFU cm -2 for the L. monocytogenes ATCC 35152 strain, and between 5.36±0.59 and 5.68±0.24 log 10 CFU cm -2 in the L. monocytogenes QF Oxford in the72 hours studied time. On PP surface the sessile cell values were between 6.22±0.51 and 6.72±0.07 log 10 CFU cm -2 for L. monocytogenes 4B, between 6.44±0.37 and 6.62±0.41 log 10 CFU cm -2 for the strain L. monocytogenes ATCC 35152, and between 6.86±0.14 and 7.03±0.01 log 10 CFU cm -2 in the isolate L. monocytogenes QF Oxford at the times studied.

Biofilm formation by L. monocytogenes QF Oxford on SS and PP surfaces in UHT milk under different conditions
At a temperature of 37ºC, the mean planktonic cell population in tubes containing SS and PP surfaces was 8.24±0.40 log 10 CFU mL -1 for times up to 72 hours. The sessile cell population on SS surfaces ranged from 3.10±0.07 to 3.48±0.23 log 10 CFU cm -2 ( Figure 1A). On PP surfaces, the values of the sessile cells were between 4.75±0.59 to 5.07±0.44 log 10 CFU cm -2 ( Figure 1B), in the times studied. When paired analyzes compared the different times analyzed, the log 10 CFU cm -2 of the L. monocytogenes QF Oxford group on the SS surface with the UHT whole milk medium showed a significant reduction in the time of 72 hours when compared to the time of 48 hours (t test of Student for paired samples, p =0.025), showing no difference for the other analyses. In the evaluation of the biofilm formation capacity at RT, the mean of the planktonic cells values in SS and PP was 8.54±0.10 log 10 CFU mL -1 in times of up to 72 hours. The sessile cell counts on SS surface ranged from 3.99±0.08 to 4.23±0.02 log 10 CFU cm -2 ( Figure 1C), and 5.23±0.029 to 6.07±0.03 log 10 CFU cm -2 on PP surface at the times studied ( Figure 1D).
In the present study, the capacity of biofilm formation at refrigeration temperature with times of 72, 120 and 168 hours was also evaluated. At these times, the mean of the planktonic cells values in the tubes containing the SS and PP surfaces was 7.16±1.30 log 10 CFU mL -1 . In SS surfaces, sessile cell values were not observed in 72 hours of incubation. The results, from 120 and 168 hours, were 3.31±0.14 to 4.04±0.14 log 10 CFU cm -2 of sessile cells respectively ( Figure 1E). The values for the sessile cells in the PP surfaces ranged from 3.23±0.20 to 4.78±0.43 log 10 CFU cm -2 at the times studied ( Figure 1F).
At 37°C, the log 10 CFU cm -2 of the L. monocytogenes QF Oxford group decreased in 72 hours compared to 48 hours on the SS surface (Student's t-test for paired samples, p =0.025, Figure 1A), with no changes observed on the PP surface ( Figure 1B). At RT, the log 10 CFU cm -2 of the Oxford QF group increased in 48 hours compared to 24 hours on the SS surface (Student's t-test for paired samples, p =0.043, Figure 1C) and in 72 hours compared to 24 hours on the PP surface (Student's t-test for paired samples, p =0.035, Figure 1D).
At refrigeration temperature, the log 10 CFU cm -2 of the L. monocytogenes QF Oxford group, on the SS surface, increased in 120 hours compared to 72 hours (Student's t-test for paired samples, p =0.001, Figure 1E) and in 168 hours versus 120 hours (Student's t-test for paired samples, p =0.049, Figure 1E). An increase in log 10 CFU cm -2 of the L. monocytogenes QF Oxford group, in PP, was evidenced at 120 and 168 hours compared to 72 hours, when kept at refrigeration temperature ( Figure 1F).

Evaluation of biofilm formation capacity by L. monocytogenes QF Oxford associated with P. fluorescens PL7.1 on SS and PP with UHT milk substrate at different temperatures
In the evaluations at RT, the mean of planktonic cells of L. monocytogenes QF Oxford and P. fluorescens PL7.1 was 8.17±0.40 log 10 CFU mL -1 at the times studied. At RT, SS evaluations showed sessile cell counts between 3.99±0.21 and 4.84±0.58 log 10 CFU cm -2 for the isolate L. monocytogenes QF Oxford and between 3.54±0.07 and 6.07±0.23 log 10 CFU cm -2 for the bacteria P. fluorescens PL7.1 (Figure 2A). In the PP surfaces, the sessile cell values were between 5.46±0.37 and 5.66±0.11 log10 CFU cm -2 for the isolate L. monocytogenes QF Oxford and between 5.40±0.29 and 6.71±0.43 log 10 CFU cm -2 for P. fluorescens PL7.1 ( Figure 2B).
In the evaluations at refrigeration temperature, the mean values of planktonic cells of L. monocytogenes QF Oxford and P. fluorescens PL7.1 were 6.71±1.10 log 10 CFU mL -1 at the times studied. In SS surfaces, the values of sessile cells of the isolate L. monocytogenes QF Oxford were not recovered in 72 hours of incubation. The results from 120 and 168 hours were 3.04±0.60 and 3.85±0.40 log 10 CFU cm -2 of sessile cells respectively. For P. fluorescens PL7.1 the sessile cell values were between 4.40±0.07 to 4.73±0.55 log 10 CFU cm -2 at the times studied ( Figure 2C).
In the PP surfaces, the sessile cell values of the isolate L. monocytogenes QF Oxford were not observed in 72 hours of incubation. At 120 and 168 hours, the values were 2.89±0.75 and 3.82±0.33 log 10 CFU cm -2 sessile cells respectively. For P. fluorescens PL7.1 the values of sessile cells in PP were between 5.60±0.17 to 5.77±0.01 log 10 CFU cm -2 at the times studied ( Figure 2D).
There was a higher log 10 CFU cm -2 of sessile cells from the L. monocytogenes QF Oxford group in 24 hours in SS and at RT compared to the sessile cells from the P. fluorescens PL7.1 group (Student's t-test for independent samples, p =0.028). An increase in sessile cells within 72 hours was also observed in SS surfaces at RT in the P. fluorescens PL7.1 group compared to the L. monocytogenes QF Oxford group (Student's t-test for independent samples, p =0.028) (Figure 2A). Similarly, in the PP surfaces and at RT, the P. fluorescens PL7.1 group presented higher log 10 CFU cm -2 of sessile cells in 72 hours (Student's t-test for independent samples, p =0.038) ( Figure 2B). In SS and PP at refrigeration temperature, the P. fluorescens PL7.1 group presented higher log 10 CFU cm -2 of sessile cells at 72, 120 and 168 hours compared to the L. monocytogenes QF Oxford group (Student's t test for independent samples, p ≤0.0001) ( Figure 2C and 2D) Acta Scientiarum. Biological Sciences, v. 44, e61925, 2022

Evaluation of sanitizers in the eradication of biofilm in SS
On SS surfaces containing 4.23±0.14 log 10 CFU cm -2 of sessile cells of the bacteria L. monocytogenes QF Oxford and 5.46±0.05 log 10 CFU cm -2 of sessile cells of the bacteria P. fluorescens PL7.1 were immersed in peracetic acid and sodium hypochlorite. After the application time, the sessile cells were counted, for which no growth was observed in the treated group. At 72 hours, in the bacterium L. monocytogenes QF Oxford, a group effect (one-way ANOVA, F(4.9) =2686.580, p ≤0.0001) was observed, with a mean of log 10 CFU cm -2 of the L. monocytogenes QF Oxford group higher than the control group and all higher than the sanitizers (peracetic acid and sodium hypochlorite) (post hoc Bonferroni, p ≤0.05). The same effect was evidenced at 72 hours in the P. fluorescens PL7.1 bacteria being the mean log 10 CFU cm -2 of the PL7.1 group (one-way ANOVA, F (4.9) =8811.621, p ≤0.0001, Bonferroni post hoc, p ≤0.05).

Discussion
The present study analyzed species of Listeria sp. from food samples, slices and food handling surfaces in laboratories for the preparation of foods of animal origin for cold consumption in the city of Porto Alegre -RS/Brazil. The occurrence of these bacteria in ready-to-eat foods or in places such as manipulation benches indicates that safety measures to prevent contamination must be improved immediately. The species of L. monocytogenes, L. innocua, L. seeligeri are reported by other works identifying these microorganisms in samples similar to the present study (Skowron et al., 2019;Osman, Kappel, Fox, Orabi, & Samir, 2020;Gwida et al., 2020). In Brazil, Pessoa et al. (2020), described the presence of Listeria sp. in Italian type salamis, ready for consumption. Souza et al. (2020) reported the presence of L. monocytogenes and L. innocua in chicken carcass isolates.
For most infections caused by L. monocytogenes the treatment of choice is ampicillin, penicillin, erythromycin, gentamicin or sulfamethoxazole-trimethoprim (sulfazotrim) (Durán-Garrido, Gómez-Palomo, Estades-Rubio, & Jiménez-Garrido, 2020; Rzepniewski, Goluchowska, Idziakowska, & Najman, 2020). In the assessment of susceptibility to antimicrobials, among the eight antimicrobials tested, ampicillin and penicillin proved to be efficient in eliminating this bacterium. However, we observed that 64.3% of the bacteria used in the study were resistant to at least one antibiotic tested. Clindamycin resistance with L. monocytogenes isolates is widely described in other works (Oliveira et al., 2018;Arslan & Selin, 2019). Resistance to sulfazotrim is important as it is the second-choice drug in patients allergic to penicillin (Demoliner et al., 2015;Olaimat et al., 2018). These antimicrobial resistance factors mentioned are especially related to the acquisition of genes such as mefA, erm, lnuA and lnuB, dfrD, dfrG, and dhfr. Another important aspect of sulfazotrim resistance is the conjugation of plasmid IP501 and transfer of the Tn6198 transposon among Enterococcus faecalis to L. monocytogenes, making it resistant to the sulfazotrim compound (Oliveira et al., 2018;Maung et al., 2019;Matereke & Okoh, 2020).
An important form of Listeria sp.to resist to the environment is the potential for biofilm formation (Chusri et al., 2012). From the species of L. monocytogenes, three of them presented a profile of strong biofilm formers. The L. innocua specie presented themselves as biofilm moderate formers, whereas on the L. seeligeri, three of them presented a moderate profile of biofilm former and one was classified as weak microplate biofilm former. The microplate assay is an indirect reading technique of cell adhesion and biofilm formation in vitro. The studies carried out with this technique presented varying levels regarding the classification based on OD, with spectra between weak, moderate and strong biofilm formers. Nevertheless, ratified by the mentioned studies, it is an important technique especially for screening with bacteria that may have the ability to adhere to surfaces or the ability to form biofilms (Nilsson, Ross, & Bowman, 2011;Dygico, Gahan, Grogan, & Burgess, 2020;Osman et al., 2020).
An important parameter in determining whether there is bacterial adhesion or mature biofilm formation is the number of microorganisms present on the surface. Counts upper 5 log 10 CFU cm -2 are considered to have mature biofilm (Wiktorczyk et al., 2018;Alonso & Kabuki. 2019;Ramires et al., 2021). In the present study we observed that three L. monocytogenes (4B, ATCC 35152 e QF Oxford) which revealed the ability to form biofilm in the microplate test, were also able to form biofilm on surfaces after 24 hours of incubation, in TSBYE culture medium at 37°C, both in SS material and in PP. Studies with these surfaces describe the formation of biofilm, with sessile cell values similar to the present work (Alonso & Kabuki 2019;Ripolles-Avila, Cervantes-Huaman, Hascoët, Yuste, & Rodríguez-Jerez, 2019;Skowron et al., 2019;Ramires et al., 2021).
Substrates such as culture media can inhibit or favor the growth of microorganisms and change the composition of the biofilm, depending on the chemical structures involved (Bassi, Cappa, Gazzola, Orrù, & Cocconcelli, 2017). In this study, we evaluated the capacity of L. monocytogenes to form biofilm in the UHT milk, where we observed a reduction in the value of CFU cm -2 of sessile cells compared to the culture medium. Alonso and Kabuki (2019) observed a reduction of approximately 1 log 10 CFU cm -2 in the number of sessile cells of L. monocytogenes in 24 hours of incubation, in whey protein, when compared to the substrate culture medium. In this study we observed a reduction of 1.93±0.05 and 1.96±0.04 log 10 CFU cm -2 in the values of sessile cells in SS and PP surfaces, respectively, when cultivated in UHT milk compared to cultures in TSBYE medium in 24 hours of evaluation. This reduction in log 10 CFU cm -2 can be attributed to milk protein, due to its composition, in disputing the same location of the surfaces, influencing the bacterial adhesion capacity (Bassi et al., 2017;Alonso et al., 2020). Therefore, the difference in values related to the surfaces can be influenced by the porosity and surface texture between the two materials tested (Marik, Zuchel, Schaffner & Strawn, 2020;Dygico et al., 2020).
In the adhesion process, the temperature factor is also an important influencer. In this study, we observed that L. monocytogenes QF Oxford developed better at RT, on both surfaces with a higher rate of log 10 CFU cm -2 at RT with averages of 28.6ºC when compared to the other temperatures tested. The temperature around 25 and 30°C is reported as the highest sessile cell count of this microorganism when similar materials are used (Dygico et al., 2020;Mendez, Walker, Vipham, & Trinetta, 2020). This factor is influenced by the motility expressed in L. monocytogenes at temperatures close to the environment, and reduced when exposed to temperatures of 37°C (Mendez et al., 2020;Muchaamba, Stephan, & Taurai, 2021).
This cooperative interaction between bacterial species can change the composition of the biofilm matrix increasing resistance, the biomass of the biofilm formed, the adherence, or present an environment of microbial competition (Govaert, Smet, Walsh, & Impe, 2019). The evaluations described between L. monocytogenes and P. fluorescens in biofilms showed that L. monocytogenes was able to adhere to the SS surface under multi-species conditions, however along the period the number of sessile cells of L. monocytogenes obtained a reduction, but did not influenced the population level of P. fluorescens (Maggio et al., 2021). L. monocytogenes with B. cereus in dual-species biofilm, can reach counts above 5 log 10 CFU cm -2 by cooperation. On the other hand, in the presence of B. cereus, an antagonistic substance producer, L. monocytogenes can adhere, without promoting biofilm formation (Alonso et al., 2020). When analyzing a study of cooperating biofilm cells by L monocytogenes and P. fluorescens, the population of L monocytogenes showed an average of 1-2 log 10 CFU cm -2 higher when compared to monospecies culture (Puga, Dahdouh, SanJose, & Orgaz, 2018 Studies have evaluated biofilm formation in SS and PP at temperatures of 7, 23 and 30°C for 24, 48 and 72 hours in two species of psychrotrophic bacteria, reporting that both cultures of P. fluorescens were capable of adhering to both types of surfaces. The count of bacterial cells adhering to the PP surface was higher than those adhering to SS for both isolates, due to the type of surface of the materials tested (Bogo et al., 2020). These results corroborate the values found in this study.
Sanitary practices in food production environments aim to eliminate microorganisms that may be pathogenic or harmful to food. Chlorine-based solutions such as hypochlorite and peracetic acid are disinfectants widely used as sanitizers in the food industry (Demoliner et al., 2015). Thus, the present work evaluated the effectiveness of peracetic acid and sodium hypochlorite sanitizers in the eradication of adhered cells and biofilm in associated culture. These two products were effective when applied for 10 minutes on surfaces containing 4.23±0.14 log 10 CFU cm -2 of L. monocytogenes QF Oxford sessile cells and biofilms with 5.46±0.05 log 10 CFU cm -2 of P. fluorescens PL7.1 sessile cells. Studies that evaluated peracetic acid in biofilms formed by L. monocytogenes isolated from a cheese processing factory, indicated the efficiency of this sanitizer in biofilms formed in SS (Lee et al., 2019). Similar results were observed in this study, indicating that application for 10 minutes is effective in eliminating adhered L. monocytogenes cells and P. fluorescens biofilms in associated culture.
The obtained isolated of Listeria sp., showed to be persistent, with adhesion capacity and biofilm formation on surfaces used in food industries. Furthermore, they proved to be resistant to second option antimicrobials in the treatment of infections caused by L. monocytogenes, which could represent a risk to consumers.

Conclusion
Biofilm mono-species of L. monocytogenes can also colonize on SS and PP surfaces in TSBYE broth. L. monocytogenes also form biofilm in dual-species with P. fluorescens PL7.1 in several temperatures.
The sanitizers peracetic acid and sodium hypochlorite, showed efficiency in the eradication of biofilm on SS, when applied according to the manufacturers' recommendations. Therefore, surfaces and foods when handled inappropriately can harbor these microorganisms, and as potential biofilm formers they increase the persistence of Listeria sp. in these locations. We emphasize the importance of proper hygiene in the food production process in order to minimize the risks to consumer health.