<b>Biosorption of Cu (II) and Zn (II) with açaí­ endocarp <i>Euterpe oleracea</i> M. in contaminated aqueous solution

Autores

  • Affonso Celso Gonçalves Junior Universidade Estadual do Oeste do Paraná
  • Gustavo Ferreira Coelho Centro Universitário Dinâmica das Cataratas
  • Daniel Schwantes Pontifí­cia Universidade Católica do Paraná
  • Angela Laufer Rech Universidade Estadual do Oeste do Paraná
  • Marcelo í‚ngelo Campagnolo Universidade Estadual do Oeste do Paraná
  • Alisson Junior Miola Universidade Estadual do Oeste do Paraná

DOI:

https://doi.org/10.4025/actascitechnol.v38i3.28294

Palavras-chave:

adsorption process, kinetic parameters, isotherms, thermodynamic parameters

Resumo

Current analysis investigates the capacity of the açaí­ endocarp (Euterpe oleracea M.) as a biosorbent for the removal of Cu2+ and Zn2+ in monoelementary water solutions. The best conditions for the ion adsorption process were pH of the solution at 4.0; 8 g L-1 of the biosorbent mass per volume of solution; best equilibrium time at 60 min. The application of kinetic models suggests that chemosorption may be the main limiting stage for metal ion adsorption. In the case of adsorption isotherms, Langmuir´s model had the best adjustment for biosorption and indicated adsorption in monolayers. A strong interaction of metals with the surface of the adsorbent was indicated due to low elution rates. Thermodynamic parameters showed that the biosorption process was spontaneous and endothermal. Results demonstrated that the use of the açaí­ endocarp as biosorbent is an alternative for the remediation of Cu2+ and Zn2+ contaminated waters since it is a natural, low-cost and highly available material.

 

Downloads

Não há dados estatísticos.

Downloads

Publicado

2016-06-22

Como Citar

Gonçalves Junior, A. C., Coelho, G. F., Schwantes, D., Rech, A. L., Campagnolo, M. í‚ngelo, & Miola, A. J. (2016). <b>Biosorption of Cu (II) and Zn (II) with açaí­ endocarp <i>Euterpe oleracea</i> M. in contaminated aqueous solution. Acta Scientiarum. Technology, 38(3), 361–370. https://doi.org/10.4025/actascitechnol.v38i3.28294

Edição

Seção

Quí­mica

 

0.8
2019CiteScore
 
 
36th percentile
Powered by  Scopus

 

 

0.8
2019CiteScore
 
 
36th percentile
Powered by  Scopus

Artigos mais lidos pelo mesmo(s) autor(es)

1 2 > >>