<b>Performance assessment of a microsprinkler<b>
DOI:
https://doi.org/10.4025/actascitechnol.v36i2.11693Keywords:
geomorphology, experimental, prototype, simulated rainfall, soil erosionAbstract
Surface hydrological processes are essential to the understanding and prediction of soil erosion. Several equipments are used to measure infiltration rate, runoff and soil loss. However, researchers build their own equipment due to the specific sites where the measurements are performed. This study evaluated the performance of a microsprinkler developed to measure the hydrological processes on unpaved rural roads. The microsprinkler is portable, lightweight, easy to operate, and also low cost. The measured parameters refer to different physical aspects of the rainfall produced as: intensity, drop size, kinetic energy and the simulation area. The microsprinkler was tested at different heights and pressures. The main results obtained: the intensity of simulated rainfall was 71.4 - 148.3 mmh-1, the drop size ranged from 0.3 to 1.2 mm (mean 0.7 mm), the kinetic energy of rainfall varied between 51 and 77% compared with a natural rainfall of similar intensity, and the simulation area had 0.28 - 0.56 m2 (mean 0.40 m2). The parameters obtained in this study are within the limit of others simulators reported in the literature.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
DECLARATION OF ORIGINALITY AND COPYRIGHTS
I Declare that current article is original and has not been submitted for publication, in part or in whole, to any other national or international journal.
The copyrights belong exclusively to the authors. Published content is licensed under Creative Commons Attribution 4.0 (CC BY 4.0) guidelines, which allows sharing (copy and distribution of the material in any medium or format) and adaptation (remix, transform, and build upon the material) for any purpose, even commercially, under the terms of attribution.
Read this link for further information on how to use CC BY 4.0 properly.








8.png)



