Elective catalytic reduction of NO with propane on V2O5/SiO2, V2O5/TiO2, and V2O5/Al2O3 catalysts obtained through the sol-gel method - doi: 10.4025/actascitechnol.v35i1.11888
DOI:
https://doi.org/10.4025/actascitechnol.v35i1.11888Keywords:
vanadia, mixed oxides, N2, NOxAbstract
Â
Vanadium-based compounds have received a lot of attention in the last years due to their high and selective catalytic activities in major industrial reactions. The catalytic properties of V2O5 may be strengthened and modified when it is dispersed in pure oxides like SiO2, TiO2, and Al2O3. In this work, mixed oxides V2O5/SiO2, V2O5/TiO2, and V2O5/Al2O3 were prepared through the sol-gel method and obtained in nominal concentrations of 10% of V2O5. All samples were submitted to calcination in muffle at 400ºC for 5h. The characterization of the materials by nitrogen adsorption indicated that they present a mesoporous structure. XRD results disclosed that vanadium is highly dispersed in mixed oxide 10% V2O5/TiO2. The materials obtained were studied through selective catalytic reduction (SCR) of NO with propane. It was observed that the V2O5/TiO2 system presented a greater efficiency in the conversion of NO to N2 associated to a higher dispersion of vanadium in the support, if compared with the results of other systems reported in literature.
Â
Downloads
Downloads
Published
Issue
Section
License
DECLARATION OF ORIGINALITY AND COPYRIGHTS
I Declare that current article is original and has not been submitted for publication, in part or in whole, to any other national or international journal.
The copyrights belong exclusively to the authors. Published content is licensed under Creative Commons Attribution 4.0 (CC BY 4.0) guidelines, which allows sharing (copy and distribution of the material in any medium or format) and adaptation (remix, transform, and build upon the material) for any purpose, even commercially, under the terms of attribution.
Read this link for further information on how to use CC BY 4.0 properly.
8.png){kind=logo}
