Characterization of SnO2-based gas sensors to analyze diesel and biodiesel blends
DOI:
https://doi.org/10.4025/actascitechnol.v46i1.66600Keywords:
gas sensor; tin dioxide; blends; biodiesel; ethanol; diesel.Abstract
This study analyzed biodiesel blends using sensors constituted by SnO2 pellets with gold interdigitated contacts deposited on the surface. Tin dioxide was synthesized by the polymeric precursor method with further calcination treatment at 500°C, conformed and sintered at three temperatures to form three different samples: 700°C (Sn1), 900°C (Sn2) and 1100°C (Sn3). The samples were analyzed by X-Ray Diffraction, FEG-SEM (Field Emission Gun - Scanning Electron Microscopy), Raman spectroscopy, and electrical measurements. Results confirmed the formation of rutile-type tetragonal cassiterite phase, with quasi-spherical particles a moderate degree of heterogeneity in particle size 30-90 nm). Raman vibrational modes and infrared spectrum also confirmed the presence of tin oxide in high purity rutile phase. Sensorial measurements showed high sensitivity, response, and recovery time in tests with biodiesel/ethanol mixtures, allowing to distinguish between blends with a wide range of composition and serving as a potential device to detect adulterated fuel.
Downloads
Downloads
Published
Issue
Section
License
DECLARATION OF ORIGINALITY AND COPYRIGHTS
I Declare that current article is original and has not been submitted for publication, in part or in whole, to any other national or international journal.
The copyrights belong exclusively to the authors. Published content is licensed under Creative Commons Attribution 4.0 (CC BY 4.0) guidelines, which allows sharing (copy and distribution of the material in any medium or format) and adaptation (remix, transform, and build upon the material) for any purpose, even commercially, under the terms of attribution.
Read this link for further information on how to use CC BY 4.0 properly.
8.png){kind=logo}
