<b>Applicability of the Pinus bark (<em>Pinus elliottii</em>) for the adsorption of toxic heavy metals from aqueous solutions</b> - doi: 10.4025/actascitechnol.v34i1.9585
DOI:
https://doi.org/10.4025/actascitechnol.v34i1.9585Keywords:
Adsorption, cadmium, lead, chromiumAbstract
Â
Current research evaluates the efficaciousness of pine (Pinus elliottii) bark as adsorbent of the toxic heavy metals cadmium (Cd), lead (Pb) and chromium (Cr) from aqueous solutions, at two pH conditions: 5.0 and 7.0. Approximately 500 mg of adsorbent material and 50 mL of solution contaminated by Cd, Pb and Cr at different concentrations prepared from standard solutions of each metal were added in 125 mL Erlenmeyer flasks. Flasks were stirred during 3h at 200 rpm at 25ºC. Further, 10 mL aliquots were then retrieved and concentration of metal Cd, Pb and Cr determined by AAS. Adsorption isotherms for each metal were consequently obtained and linearized according to Langmuir and Freundlich´s mathematical models. Results show that the Pinus bark was efficacious in the removal of toxic heavy metals Cd, Pb and Cr from contaminated solutions and that the bark´s adsorption capacity depended on pH solution.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
DECLARATION OF ORIGINALITY AND COPYRIGHTS
I Declare that current article is original and has not been submitted for publication, in part or in whole, to any other national or international journal.
The copyrights belong exclusively to the authors. Published content is licensed under Creative Commons Attribution 4.0 (CC BY 4.0) guidelines, which allows sharing (copy and distribution of the material in any medium or format) and adaptation (remix, transform, and build upon the material) for any purpose, even commercially, under the terms of attribution.
Read this link for further information on how to use CC BY 4.0 properly.








8.png)



